WUXI JINYE COMPLETE EQUIPMENT CO.,LTD.
Wuxi Jinye Complete Equipment Co.,Ltd
Add to Cart
CR Copper Brass coil sheet Slitting Line Machine after cold rolling 0.2 -2.0 X 600
This copper slitting line is used for copper coils edge trimming and recoiling, or slitting and recoiling, you can cut strip(s) in midway to realize big diameter coil(s) to become smaller diameters, but the recoiled coils inner diameter keeps the same. If you want to have different inner diameter of recoiled coils, the recoiler should have more than one mandrels available.
Input and Output:
Copper coil thickness and width:2.0-0.2×650
Copper coil weight:5000kg
Slitting speed:100m/min
Uncoiling diameter: 400mm, 508mm
Recoiling diameter: 300mm, 400mm, 508mm
Composition
| Item | Parameters | |
| 1 | Single mandrel uncoiler, | 5T copper coil, cantilever mandrel, 37KW AC |
| 2 | Looping1 | 2m length 1m width 4m depth |
| 3 | Side guide | 100-650mm manual adjust |
| 4 | Slitter | ID150 x OD250 x 10mm 6CrW2Si knife, 55KW 10strips, 100m/min |
| 5 | Scrap winder or chopper | 11KW |
| 6 | Looping 2 | 3m length 1m width 5m depth |
| 7 | Separator,Tensioner | ID85xOD180 x 3mm separating discs, hydraulic press plate type tension |
| 8 | Recoiler | 75KW AC 400/508mm mandrel |
| 9 | Hydraulic system | 12Mpa, 7.5KW |
| 10 | Electric control system | Siemens PLC, INOVANCE AC drive |
Copper strip slitting machine is important equipment in copper sheet processing industry: when the copper sheet thickness reduces to edge cracks, must stop the rolling process, come to the slitter to do edge trimming and then go back to further rolling. After the cold rolling and annealing, also need slitting to certain widths of strips for afterward application of baby strips.
We are expert of slitting lines manufacturer, the copper strips widths usually not more than 850mm, the 600mm, 500mm, 400mm, 300mm are often seen, so the slitter machine capacity follow these parameters, the copper slitting machine is precision mini type, our high precision slitting line is able to slit copper sheet, aluminum sheet, stainless steel, electric steel(CRGO or CRNGO) and carbon steel coils. Each slitter is customized, we would like to listen to and satisfy our customers, we always go with market.
