WUXI JINYE COMPLETE EQUIPMENT CO.,LTD.
Wuxi Jinye Complete Equipment Co.,Ltd
Add to Cart
High Precision Heavy Gauge Sheet Metal Slitting Machines
Heavy Gauge metal slitting machine one side is strong machine;
1. Strong machine structure, rollers, shafts to bear big gauge sheet metal slitting load.
2. Big motor power to supply big torque and enough speed.
3. Big control drive cabinet to control big motors precisely.
Meanwhile the other side is high precision machine:
1. Our high precision machine design not for small gauge but also go with heavy gauge machine
2. We take use of good precise structure in each model metal slitting machine.
3. the precision is also from more convenient operation and preciser control system.
Our high precision steel coil slitting line improves in many parts, can give good stability and precision.
1.Pinch roller plays deflection guide role while pinch feeding, preleveler releases steel sheet internal stress.
2.Side guide unit: add 1 over 2 rollers, pneumatically press down upper roller, to guide steel strip from side and up-down direction before slitter.
3.Slitter:
4. Scrap winder: hydraulic horizontal winding, scrap baller & chopper opitonal
5. Pre separating and tensioner: all separating shafts are the same and easily dismantled and installed.
tension provision is variable piston pump hydraulic system,two hydraulic cylinders on top give balance pressure.
Tension is provided by wool felt and rollers type.
6. Post shear and Deflector roller: post shear cut off irregular strips tails,making packing on recoiler easier.
Encoder on deflector roller track the slitting length and shows on touch screen.
7. Recoiler: portal frame overarm separator to hold slit strips separately in neatness.
Parameters:
| Raw Material | Finished product | Tools | Power | Capacity |
| Mother coil | Baby coils | |||
| ID 508mm-760mm | ID 610mm | disc knife ID300 x OD480 x 25mm | slitter 200KW | speed 0-60m/min |
| OD 2000mm | OD 2000mm | knife spacer ID300x OD380 | recoiler 250KW | precision +/-0.20mm |
| Weight 30T | Weight 30T | separator ID110 x OD250mm | total 540KW | Camber 1mm/m |
| Thickness 3-10mm | strips 3mm x 15slits, 10mm x 5slits | tension pad 1350 x 600mm | hump: | |
| width 300-1250mm | Width 20-600mm | Nylon spacer: ID110 x OD135mm |
Composition and Parameters:
| No. | Composition | Parameters |
| 1 | Feeding Coil car | 30T |
| 2 | Double mandrel uncoiler | Φ508-760 mm, 30T load |
| 3 | Pinch feeder and Five Roller Leveler | Φ180 mm, 45KW |
| 4 | Hydraulic shear | 10x 1300 |
| 5 | transmission table | 4000mm length |
| 6 | side guide and Pres Roller | 300-1300mm wide |
| 7 | slitting machine | Φ300mm, 200KW +4KW x 3 |
| 8 | edge scrap winder and Strips tails Press | 11KW x 2 |
| 9 | Pit accumulator 2 | 5000mm length |
| 10 | Pre-separator, Tensioner, balancing roller | Twice separating, wool felt tension |
| 11 | ReCoiler (with separating discs, pusher) | Φ610mm, 250KW, 30T load |
| 12 | Coils discharging car | 30T |
| 13 | Hydraulic system | Rexroth valves, Yuken pump |
| 14 | Electrically control system | Parker DC drive, Siemens PLC and touch screen |
